WorkPal Compact Servo is a pallet changer that requires minimal floor space. It is designed for automatic changing of pallets in chucks on machine tables in:
- milling machines
- grinding machines
- die-sinking EDM machines
- wire EDM machines.
With a sliding door across one full side, the WorkPal Compact Servo gives maximum access to the magazine. This greatly facilitates the loading and unloading of pallets.
Technical specifications
• Transfer weight – 50 kg (may be limited by the pallet system)
• Maximum total weight in the magazine – 300 kg
• MR, X and Y axes – AC servo motor
• Maximum vertical movement – 400 mm
• Maximum horizontal movement – 400 mm
• Required power supply – single-phase, 180 – 240 V AC, 10 A at 230V
• Required air pressure – 6 bars ± 1 bar, 150 l/min
• Required floor space – 1,200 x 1,200 mm
• Interface – serial RS232/422, M function or parallel I/O
Simple installation
No expensive machine modifications are required.
The changing arm lifts pallets over the tank in wire EDM machines.
Options
- In-built lighting
- Integrated drying station with/without thermostat for temperature control
- ID system with/without automatic scanning
- Cell PC with WorkShopManager software
60-position magazine
ID-system
Drying station
Accessories
• Chip guard for Macro 54 and 70 – U-50167.55
• Code carrier – 3R-863.01-10, 3R-863.01-10M, 3R-863.25-10, 3R-863.30-10 or C690 800
Application:
- Table chuck, milling
- Table chuck, grinding
- Table chuck, die-sinking EDM
Pallet system:
Macro 54 and 70 - 24 or 60 positions
Macro with chip guard - 24 positions
GPS70 - 24 or 60 positions
GPS120 - 20 positions
Macro Ø 116 - 20 positions
MacroMagnum - 12 positions
GPS240 - 7 positions
Dynafix - 5 positions
Application:
- Table chuck, wire EDM
Pallet system:
Macro - 12 positions
Unimatic - 12 positions
MacroTwin - 4 positions
Application:
- Wire EDM B axis
Pallet system:
Macro 54 and 70 - 12, 24 or 40 positions
printer friendly version