| Case
Stories | Layout
| Literatures |
Magazine
solutions | Pictures | Technical data |
WorkPal Compact Servo is a pallet changer that
requires minimal floor space. It is designed for automatic changing
of pallets in chucks on machine tables in:
- milling machines
- grinding machines
- die-sinking EDM machines
- wire EDM machines.
With a sliding door across one full side, the WorkPal Compact Servo
gives maximum access to the magazine. This greatly facilitates the
loading and unloading of pallets.
Technical specifications
• Transfer weight - 50 kg (may be limited by the pallet
system)
• Maximum total weight in the magazine - 300 kg
• MR, X and Y axes - AC servo motor
• Maximum vertical movement - 400 mm
• Maximum horizontal movement - 400 mm
• Required power supply - single-phase, 180 - 240 V AC, 10 A at
230V
• Required air pressure - 6 bars ± 1 bar, 150 l/min
• Required floor space - 1,200 x 1,200 mm
• Interface - serial RS232/422, M function or parallel I/O
Simple installation
No expensive machine modifications are required.
The changing arm lifts pallets over the tank in wire EDM
machines.
Options
- In-built lighting
- Integrated drying station with/without thermostat for temperature
control
- ID system with/without automatic scanning
- Cell PC with WorkShopManager software
60-position magazine
ID-system
Drying station
Accessories
• Chip guard for Macro 54 and 70 - U-50167.55
• Code carrier - 3R-863.01-10, 3R-863.01-10M, 3R-863.25-10,
3R-863.30-10 or C690 800
Application:
- Table chuck, milling
- Table chuck, grinding
- Table chuck, die-sinking EDM
Pallet system:
Macro 54 and 70 - 24 or 60 positions
Macro with chip guard - 24 positions
GPS70 - 24 or 60 positions
GPS120 - 20 positions
Macro Ø 116 - 20 positions
MacroMagnum - 12 positions
GPS240 - 7 positions
Dynafix - 5 positions
Application:
- Table chuck, wire EDM
Pallet system:
Macro - 12 positions
Unimatic - 12 positions
MacroTwin - 4 positions
Application:
- Wire EDM B axis
Pallet system:
Macro 54 and 70 - 12, 24 or 40 positions
printer friendly version